Drop Tester

   Perform free fall test on the face, corner and edge of the package, equipped with a digital height indicator and height tracking using a decoder, so that the product's drop height can be accurately given, and the error from the preset drop height does not exceed 2% or 10mm. This machine adopts single-arm double-column structure, with electric reset, electric control drop and electric lifting device, which is easy to use; unique hydraulic buffer device greatly improves the service life, stability and safety of the machine. The single-arm setting can conveniently place the product, and the error between the impact angle of the drop angle and the plane of the bottom plate is less than or equal to 5°. 

Power supply: AC380V 50Hz (three-phase five-wire system)
Test method: face angle edge
Drop height: 300 ～ 1500mm adjustable (DT-15)
                       300 ～ 2000mm adjustable (DT-20)
                       300 ～ 3000mm adjustable (DT-30)
Test load: 0～100kg (MAX)
Overall size: 1700x1200x2400mm (DT-15)
                        1700x1200x3500mm (DT-20)
                         1700x1200x4035mm (DT-30)
Support arm size: 220x 280x 8mm 21. Maximum test specimen size: 600x800x1000mm
Lifting motor power: 0.75KW
Reset motor power: 0.06KW
Machine weight: 750kg (RS-315) or 900kg (RS-320) or 1100kg (RS-330)
Operating environment: temperature 5 ～ 35 ℃; humidity <85% R.H;
voltage change ≤ ± 10%.

Adopting single-arm double-column structure design to prevent falling off due to sudden power failure and stable lifting;
Support arm adopts electric reset design no need to manually pull the arm to remember the reset;
The supporting arm adopts an electromagnet extraction structure and is assisted by a tension spring to ensure that the supporting arm falls off instantly;
Unique hydraulic buffer device design instantly absorb the impact energy of the bracket;
The universal test piece holder design can quickly test the edges corners and faces of packages of different sizes.

GB/T4757.5 、JB/T7407 、ISO2248

NO